Home page

• Home page
• News
• About Us
  • Wholesale
  • Windows and doors production
  • Cooperation
• Products
  • Plastic windows Geneo MD
  • Plastic windows Euro Design 70 5 chambers
  • Plastic windows Brillant Design 5 chambers
  • Plastic windows Brillant Design 6 chambers
  • Plastic windows Brillant Design MD
  • Plastic doors Brillant Design
• Photogallery
• Downloads
• Suppliers
  • REHAU plastic profiles
  • Roto Windows fittings
  • Pilkington
• Contact

Rehau-euro-design 70

Available in two variants: non-facing and half-facing.

The use of Rehau-Euro-Design 70 profiles offers a nearly unlimited palette of colours and shapes. A 5-chamber structure using the insulation characteristics of air and a 70-millimetre width of profiles guarantees the best thermal insulation parameters. RehauEuro-Design 70 system windows are especially recommended for low-energy houses, in adding thermal insulation and for higher-standard buildings. Modern design adds to the professional look of windows created using these profiles. An additional advantage is a window frame lower than in the case of other 5-chamber systems, which results in maximum extra light for the living space and a visually thin appearance of the window.

Modern design

Rehau-Euro-Design 70 profile windows look stylish and have a harmonious outline formed by the rounded edges and profile angles – (frame: R3, 20; outside casement: R15, 20°, inside casement: R4, 90°). A 20 mm groove cap protects the edge of the insulated glass from harmful UV radiation. This minimises the danger of damaging the frame and the consequential “sweating” of glass. Smooth external surfaces and outlines guarantee that Rehau-Euro-Design 70 profile windows look good in any building.

Higher thermal insulation and excellent tightness

The high energy efficiency of windows made using these profiles enables a lowering of heating costs, which is indirectly connected with protection of the environment. Thanks to the 20 mm window frame groove cap there is a 7 mm adherence area for the seal which, combined with the internal 8 mm seal, protects from draughts, dust and penetration by precipitation water (A, B and C load groups).

Acoustic insulation

The use of up to 41 mm thick insulated glass gives excellent protection against external noise. Such windows can meet the extreme requirements of acoustic insulation up to class 5 noise insulation.

Durability and reliability

The solid and tested RAUPVC material used for the profiles, together with the large section galvanized steel reinforcement, is a guarantee of reliability and stability of windows. The bearing elements of fittings are fixed with 3 PVC walls or by using additional steel reinforcements. This ensures a reliable transfer of loads exerted by the weight of the casement

Comfort of handling

Rehau-Euro-Design 70 system windows are easy to operate. A 3 mm gap between the casement and window frame means fail-safe operation. The use of Roto fittings makes opening and closing of the windows very easy. Due to the shortened wall on the inside part of the casement there are no problems with opening even the small windows.A smooth, angled frame base groove means it is easy to clean the windows.

Anti-burglar protection

The design of Rehau window profiles enables the use of special, reinforced elements of window fittings and other anti-burglar solutions (anti-burlglar protection up to class 3).